D.A.S. Audio Event 208A Dual 8" Three-way Powered Line Array Cabinet
Item is available as a recurring order
To automatically re-order this item before you run out, select the recurring order option during checkout.
The Event 208A Line is a three-way powered line array in a double 8” configuration.The Event 208A line array is powered by a three channel Class D amplifier which provides 360 Wpeak per channel and has been teamed up with a single M-75 compression driver with 75 mm aluminum EFW voice coil and titanium diaphragm for HF reproduction. The proprietary injected aluminum HF waveguide has been designed specifically for the Event Line Arrays providing precise 90º horizontal coverage
The Event 208A low/low-mid frequencies are reproduced by two 8" cone speakers. This section uses a "twin-band" configuration where each speaker operates in a specific frequency range. At low frequencies, the speakers work in tandem for maximum power, each driven by a dedicated amplifier channel providing360 Wpeak output power. Above the low frequency range, the advanced digital signal processing feeds the mid signal to only one of the two low frequency drivers, while the other is rolled off.
This technique eliminates off-axis interference between the drivers enabling the Event Line Arrays to maintain optimal polar and frequency response characteristics throughout the low and low-mid operating ranges. Each individual enclosure for the low frequency drivers has been tuned to provide optimum response for the specific operating range of each driver.
In the same fashion, the digital signal processing, limiting and protections are specific to each way, reducing intermodulation distortion. The Easy DSPTM Interface provides fast and easy line array configuration. The frequency response of each unit can be modified depending on the number of units in the array. A “downfill” correction is also available.
The amp´s rear panel includes quality Neutrik XLR and powerCON connectors, status LEDS to facilitate setup and D.A.S.’s Easy-DSP™ interface which simplifies preset selection for the number of units and throw depth.
- Powered 3-way system
- Light-weight Class D amplifier topology
- High-end DSP chipsets
- Easy-DSP Interface
- Quality Neutrik connectors
- Top grade Birch cabinet construction
- Durable ISO-flex finish
- Robust “quick-rig” professional rigging hardware
- Proprietary injected aluminium HF waveguide (not plastic)
- D.A.S. M-75 compression driver and cone transducers
El panel trasero del amplificador incluye conectores de calidad Neutrik®, XLR y powerCON. Los LEDS de estado facilitan el ajuste y el sistema de comunicación Easy-DSP de D.A.S. simplifica la selección del preajuste para el número de unidades y la profundidad de tiro.
- Sistema 3 vías autoamplificado
- Amplificador Clase D muy ligero
- Componentes DSP de alta gama
- Sistema configuración Easy-DSP™
- Conectores Neutrik de alta calidad
- Recinto de abedul de alta calidad
- Acabado alta durabilidad ISO-flex
- Sistema profesional de volado rápido
- Guía de ondas HF de aluminio inyectado
- Motor de compresión M-75 y altavoces D.A.S.
Things You Will Get:
- 208A Active PA Cabinet
- Power Cable
- Owner's Manual
|Power Rating||1080 Peak|
|Series||Event Line Array|
|Other Features||Easy-DSP interface simplifies preset selection for the number of units and throw depth|
|Maximum SPL||132 dB|
|Frequency Range||75 Hz -20 kHz (@-10 dB)|
|LF Driver Size||8"|
|MF Driver Size||8"|
|HF Driver Size||1.5"|
|LF Amplifier Power||360 Wpeak|
|MF Amplifier Power||360 Wpeak|
|HF Amplifier Power||360 Wpeak|
|Weight||30 kg (66 lb)|
|Dimensions||27 x 67 x 36.6 cm / 10.6" x 26.4" x 14.4"|
|Outputs||LOOP THRU: Male XLR|
|Coverage Angle||Horizontal: (-6 dB) 90º Nominal|
$49.00$35.99 Save : $13.01 (27%)
You May Also Be Interested In
$4,631.00$2,999.00 Save : $1,632.00 (35%)
$3,335.00$2,299.00 Save : $1,036.00 (31%)