RME ADI-4DD AES/ADAT Converter
Item is available as a recurring order
To automatically re-order this item before you run out, select the recurring order option during checkout.
RMEs ADI-4 DD is a highly cost-efficient AES to ADAT and ADAT to AES converterThe ADI-4DD features up to 96 kHz, built-in jitter suppression, SyncCheck input signal monitoring, SyncAlign inter-channel time control technology. Input & Output signals and other activity are clearly displayed by LEDs.
SyncCheck, already found in other RME products, not only shows if an input signal is locked, but also if multiple inputs are in synchronicity. Furthermore RMEs SyncAlign technology prevents accidental errors of ± 1 sample misalignment between the AES/EBU inputs. The AES output signal can be set to Professsional or Consumer subcode. Channel 1/2 can optionally be received and output optically (TOSLINK).
RME's SteadyClock(TM) technology guarantees an excellent performance in all clock modes. Its highly efficient jitter suppression enables the ADI-4 DD to refresh and clean up any clock signal, and to provide the clock signal as reference clock at the word clock output. Additionally, Intelligent Clock Control (ICC) will maintain the last sample rate detected as valid in case of fault and loss of input signal. The device can be stacked without limit, all devices will be sample synchronous by using word clock. All settings are stored at power-off.
- Two converters
- Four AES-3 inputs to double ADAT outputs
- Double ADAT inputs to four AES-3 outputs
- Double ADAT ports enable full 8 channel support
- 32 kHz up to 96 kHz (S/MUX).
- One Direct XLR I/O
- DB-25 connector allows for a use of industry standard AES-3 I/O breakout cables
- DB-25 switchable to pinout for Tascam (Digidesign), Yamaha and Euphonix
Things You Will Get:
Power supply 12 V / 1.25 A and power cord
|Interface Type||ADAT / AES Conversion|
|Digital Input Type||
AES/EBU: 1 x XLR, 4 x via DB-25 connector, electrically isolated, highly sensitive input stage (< 0.3 Vpp), SPDIF
ADAT® optical 2 x TOSLINK, 24-Bit, Bitclock PLL
|Digital Output Type||
AES/EBU: 1 x XLR, 4 x via DB-25 connector, transformer balanced, 5 Vpp
ADAT® Optical: 2 x TOSLINK, 24-Bit
|Dimensions||1.73 x 8.46 x 3.94 inches (WxHxD)|
You May Also Be Interested In
$3,599.00$3,049.00 Save : $550.00 (15%)
$1,599.00$1,399.00 Save : $200.00 (13%)
$1,149.00$949.00 Save : $200.00 (17%)