ART CleanBOX II Hum Eliminator
Item is available as a recurring order
To automatically re-order this item before you run out, select the recurring order option during checkout.
"Hum" in an audio system is often caused by loop effects which act like antennas. These loops can easily pick up a 60 Hz (or higher harmonics) hum transmitted by electrical wiring. Typically, these loops are connected via grounds, more commonly called "ground loops". The safest way to eliminate unwanted noise is with the CleanBOX II. Some examples of Ground Loops:
- • The power ground of a synthesizer, connected to the signal ground of the synth, into a mixer’s ground, then into a mixer's power ground. • The signal ground of a send effect (reverb, delay) into a mixer, and the connecting power grounds of the mixer and the unit. • The power ground of a guitar amplifier, connected to a signal processor which has a second guitar amplifier on the other channel, and then the second guitar amp’s power ground.
Things You Will Get:
- Hum Eliminator
Reviewed by 1 customer
Displaying review 1
- Clean box the name fit
- Clear Sound
- Easy To Use
- Professional Functions
- Professional Recording
Comments about ART CleanBOX II Hum Eliminator:
I use the box on my triton hooked to my
interface to my G-5 I have a lot of racks and wires I had a hum like B52's
I plug into the clean box 11 silent is
truely golden. It work for true.
|Other Features||Frequency Response: 10Hz – 50kHz, +/- .5dB|