Daking Audio Mic Pre EQ Single-Channel Class A Preamp/Para EQ
Item is available as a recurring order
To automatically re-order this item before you run out, select the recurring order option during checkout.
Combining the superior design of Daking's Class A Preamp with an ingenious and practical 4-Band Parametric EQ gives you full control over your microphone's sound. The Mic Pre EQ is the best of both worlds.
"The Mic Pre EQ uses all discrete transistor Class A circuits, Jensen input and output transformers and printed circuit board mounted switches. Signal capacitors are precision polypropylene or ultra low-leakage electrolytic types. Our boards are assembled on a mil-spec assembly line. The chassis are stainless steel for maximum RF and hum rejection and a long lasting finish. Every unit is hand finished, tested, burned in, and tested again in a second facility.
"Also, we just couldn’t stand to use plastic knobs, so we designed our own anodized, engraved aluminum knobs that give a much more precise and quality feel. We designed our gear to be gear you’d own for life, not some passing fancy you’d leave in the dust once you figured what the good stuff sounds like. This IS the good stuff."
Daking's Mic Pre/EQ is a single channel high end, all discrete Class A transformer balanced (input and output) unit that combines a great mic pre and world class EQ in one single rack unit. Separate mic and line inputs can be selected from the front panel "line" switch without changing wires in back. Both inputs are combo XLR/ 1/4 in TRS. High gain of 70dB handles all types of mics from ribbons to dynamics and condensers. Switched phantom enables secure ribbon mic use and 20dB pad switch prevents overload on high output condensers mics. Front panel Phase switch for inverting input phase and large overall mute button and bypass button help the work flow.
Geoff Daking's famous Mic Pre EQ has Four (4) individual EQ bands and Five (5) Stepped frequencies per band with frequencies specially chosen for effective results. This is thought to be some of the best EQ available for tracking, mixing or mastering. Continuously variable EQ boost or cut of 15dB. 25Hz High Pass 6 db/octave filter for getting rid of low end rumble that ruins tracks and 12dB per octave Low Pass filter at 15kHz helps get rid of extreme top end edginess. Separate overall output level control makes up gain lost in extensive EQ cuts. All relay switching with gold bi-furcated contacts for long term life. Steel construction for strength and noise immunity. An outboard "in line" universal power supply remotes the power to keep the noise floor low.
- Transformer Balanced Inputs and Output
- All Discrete transistor circuitry
- Class "A" amplifiers
- Four Band EQ with hard bypass
- Continuously variable boost and cut: +-16dB
- Stepped frequencies: ◦High Shelving 8-10-12-15k-20k
- Upper Mids 1.5-3-5-7-9K
- Lower Mids 125hZ-250hZ-500hZ-1K-2K
- Low Shelving 30-50-80-100-150hZ
- High & Low Pass Filters 25hZ & 15KhZ
- All relay switching w/gold bi-furcated contacts
- Switched +48v Phantom power
- Remoteable Mute and Bypass
- 20dB pad on mic input
- Stainless steel construction for noise immunity
- Aluminum knobs
- Output level control before last stage of gain
Things You Will Get:
Mic Pre IV Unit
|Analog Inputs Number||2|
|Analog Input Types||Combo XLR/TRS Line and Mic|
|Analog Outputs Number||1|
|Analog Outputs Types||XLR Line|
High/Low pass buttons
|Dimensions||19" 1U rack|
|Model||Mic Pre EQ|
$23.99 to $32.99
$22.99 to $73.99
$25.99 to $29.99
You May Also Be Interested In
$2,059.00$1,852.99 Save : $206.01 (10%)
$2,499.00$1,999.00 Save : $500.00 (20%)Just $84 per month!
0% Interest/24 Months!Click here for details