Tascam VL-S5 Powered Studio Monitor (Single)
Item is available as a recurring order
To automatically re-order this item before you run out, select the recurring order option during checkout.
The Tascam VL-S5 Powered Studio Monitors boasts a high-strength Kevlar LF cone, 1" Silk HF driver and seperate driving amplifiers for superior, natural response.High-strength Kevlar LF cone and 1" Silk HF driver for superior, natural response
In the music production process, it is imperative to hear the audio quality of your tracks as purely as they were recorded. The VL-S5 system responds quickly to audio transients with high-quality driver components. The high-strength, heat-resistant Kevlar cone combined with the 1" silk tweeter faithfully reproduce every nuance of the original recorded track.
The Kevlar cone reproduces the full frequency spectrum without distortion. Softer materials used in other monitors can bend and deform during playback, giving you an inaccurate idea of what your mix actually sounds like. The silk dome tweeter provides accurate high end playback without the harsh, fatiguing sound typical of metal-domes designs.
LF 40W and HF 30W Bi-amplified Power
The VL-S5 is built with transparent audio quality in mind. Each component is driven by a discrete amplifier for the cleanest possible playback. Seperate driving amplifiers also eliminate any possible electrical interaction between components – which could degrade performance.
The crossover frequency of 3.2kHz was selected after extended listening tests to ensure that seamless response is achieved. Many monitors place their crossover frequency lower around 1-2k, allowing them to use less expensive components, but this causes phase distortion in the midrange where guitars, vocals, and other critical mix elements lie. The high-quality Kevlar driver allows TASCAM to set the crossover higher without distortion for truer reproduction of rock, hip hop, EDM, acoustic, or any other music genre.
Balanced XLR/TRS Inputs for Low Noise Connection
Electrically balanced audio connections reduce noise when interfacing audio components, especially when cable lengths are long. Noise can come from other components in the signal chain, the electrical supply to audio components, room lighting, and other sources. Noise can get mixed with signals during transmission between components on a cable, and a balanced connection can reduce or eliminate this noise. To correctly identify whether noise is caused by a previously recorded music track or the environment, noise must be excluded from the monitoring environment.
- Power amplifier output: LF 40W/HF 30W
- 5.25-inch Kevlar cone woofer/ 1-inch silk dome tweeter
- Specially-tuned 3.2kHz crossover circuitry
- Magnetic shielding to prevent adverse effects to computer displays
- XLR/TRS balanced input connector
- RF interference protection circuit, output protection circuit, and heat protection circuit
- Volume control
Things You Will Get:
VL-S5 Studio Monitor
- Power Cable
- User Guide
|Other Features||Magnetically sheilded; RF interference protection circuit, output protection circuit, and heat protection circuit|
|Frequency Response||60Hz to 22kHz|
|HF Driver Material||Silk|
|1/4" TRS Input||Yes|
|RCA Phone Input||No|
|Stereo Mini 1/8" Input||No|
|LF Amplifier Power||40W|
|HF Amplifier Power||30W|
|LF Driver Size||N/A|
|MF Driver Size||N/A|
|HF Driver Size||1"|
|LF Driver Material||Kevlar|
|Dimensions||6.9"W × 10"H × 7.9"D|
|Combo XLR/TRS Jacks||N/A|
$39.99$24.99 Save : $15.00 (38%)
$13.99 to $27.99
$6.99$4.99 Save : $2.00 (29%)
$54.95$39.95 Save : $15.00 (27%)
$277.00$200.80 Save : $76.20 (28%)
$249.99$119.99 Save : $130.00 (52%)
$87.49$49.99 Save : $37.50 (43%)
$39.99$19.99 Save : $20.00 (50%)
$59.99$49.99 Save : $10.00 (17%)
$180.99$99.95 Save : $81.04 (45%)