Porter & Davies BC Gigster Engine with Gigster Throne
Item is available as a recurring order
To automatically re-order this item before you run out, select the recurring order option during checkout.
The BC Gigster is an amplified Tactile Generator Monitoring System, which allows you to feel, hear and experience your bass drum like you’ve never felt it before.The system transmits the full tonal quality of the bass drum, or any other drum or instrument physically up through the drum stool. This signal is registered through bone conduction and is heard ‘internally’ by the user. All the tones, dynamics and intricacies of the drums or other instruments are felt and heard internally.
The BC Gigster is made from the same superior components as the BC2, and although it has slightly fewer features, it has identical power and performance, giving you great connectivity to your drum kit whilst playing and recording. It features a single mic XLR and a standard ¼” jack line input socket. The BC Gigster will accept phantom power from a mixing console if needed.
The BC Gigster offers unparalleled response speed (0% lag) and sensitivity, so will faithfully replicate all of your playing dynamics: It will respond to long notes (beater off) as well as short notes (beater on), depending on drum dampening, tuning, and playing style.
Full control of power and intensity immediately at your side. The system is 100% consistent, night after night, completely irrelevant of acoustics, stage volume, room size, etc. The BC Gigster units are incredibly compact and efficient
As well as the bass drum, you can also feed in toms, snare drum, and even bass guitar. The sensitivity and response are so accurate that even ghosted double stroke snare rolls are represented.
Note* - Throne base (leg assembly) is NOT INCLUDED - The BC2 throne tops accommodate 7/8" spigots, which are standard on throne bases made by Roc n Soc, DW, Gibraltar, Tama, Ludwig, Premier, Yamaha, Custom Percussion, and others.
Porter & Davies Item No.
3101 - BC Gigster Engine with Round Gigster Throne
3102 - BC Gigster Engine with Saddle Gigster Throne
3103 - BC Gigster Engine with Extra-Wide Gigster Throne
Get yours today; with the security of our many decades of experience and Sam Ash Direct efficient order processing, your satisfaction is guaranteed!
Self-selecting combination XLR/JACK input.
Plug in an XLR for:
Mic in: 600 ohm electronically balanced P2 hot XLRF
Plug in a JACK for:
Line in: 10K ohm unbalanced tip: hot
Mic out: Hardwired parallel to mic in. XLRM balanced P2 hot
Line out: Hardwired parallel to line in. XLRM unbalanced P2 hot
Mic: 0dB to +60dB
Line: -20dB to +40dB
Low Contour: +/- 12dB @ 55Hz shelving
Signal Present indicator led, green: -30dB
Signal Peak indicator led, yellow: 0dB
Signal Limit indicator led, red: +12dB
Max output: 150W RMS / 4ohm 0.05%THD 20hz-18khz +/- 2dB.
Anti-thump and noiseless dynamic load protection circuitry built-in.
Connection between Engine and Throne:
Speakon NL4 to Speakon NL4 : (supplied)
Things You Will Get:
Gigster Throne Seat
2M Speakon NL4 throne link cable
|Weight||34cm x 16cm x 10cm inc rubber bumpers|
$324.99$249.99 Save: $75.00 (23.08%)
$79.99$49.99 Save: $30.00 (37.5%)
$91.99$39.95 Save: $52.04 (56.57%)